Arrow Button #
The Arrow button in the upper right corner of the Video Player allows you to reposition the Video Player window, including choosing whether the window should be docked or floating.
Pin Button #
The Pin button pins the Video Player to the left side of the screen. When pinned, click the Pin button again to un-pin.
Play/Pause Button #
The Play button will be visible when the video is paused and will change to a Pause button when the video is playing.
Stop Button #
The Stop button will stop the video from playing and return the Progress Bar to the beginning of the video.
Progress Bar #
The Progress Bar shows the current position the video is playing based on time.
Start/Stop Recording Button #
The Start/Stop Recording Button will allow you to record a subclip from the existing video that has embedded MISB FMV/STANAG 4609-spec data.
NOTE: If the video only has platform location GPS and does not already have 4-corner GPS metadata, then this button will only embed platform location GPS metadata.
NOTE: If video is not recording properly, ensure that your geoDVR Codecs has been installed by going to Help > Launch Supplemental Installer > Install geoDVR Codecs
Add Text Overlay Button #
The Add Text Overlay button will initiate the Text Overlay functionality and settings panel for that point in the video.
More detail on using the Video Text Overlay functionality can be found in the Video Text Overlay section.
Microphone Button #
The Microphone button allows you to adjust the playback volume of the video.
Camera Button #
The Camera button allows you to take a geotagged photo of a video frame. The photo can be saved and added to the geoProject, and the location of the captured photo appears on the map with a green circle icon.
Forward/Reverse Arrow Buttons #
The arrows advance the video forward or backward. The time interval for these buttons can be set in the Options menu > Video Settings > Set Video Skip Forward/Back Time.
GPS Data Bar #
While the video plays, the GPS information shows the spatial track.
Video GeoEditor Bar #
In applicable Remote GeoSystems desktop-based software, the Video GeoEditor Bar will appear above the Progress Bar when the video geoediting function is initiated. The end markers and shaded area of the Video GeoEditor Bar indicate the portion of the video that will be geoedited.
NOTE: More detail on using Video GeoEditor functionality can be found in the Video GeoEditing document.
