Power Requirements #
12 Volts / 20 Amps (240 Watts)
IMPORTANT: For aircraft/vessels/vehicles using 28 volt systems, you will need an inverter to step down power to provide the geoDVR Gen4 with 12 volts / 20 amps (240 Watts).
Power Inputs #
geoDVR Gen4s can be equipped with either a single power input or optional dual power inputs.
Barrel Connection
Most single power input configurations will feature a consumer-style “barrel” jack/connector.
Mil-Spec Connection
Most dual power input configurations will feature a “circular 2 pin mil-spec” connector as well an alternative consumer-style “barrel” jack/connector.
IMPORTANT: For more details on power requirements, sources and connections can be found in the Rear Panel I/O and Connecting Power articles in the geoDVR Gen4 manual.
