Installation Notes #
IMPORTANT: When installing the geoDVR Gen4, there should be a minimum of two inches of clearance around all sides (except the bottom) of the unit’s case to allow for proper cooling. Failing to provide this clearance will result in excess internal heat, which can mean reduced operating stability, reduced hardware lifespan, or possible damage to the unit.
Dimensions #
Width: 9.727 in / 247.0658 mm (11.33 in / 273.05 mm wide w/ flanges attached)
Height: 5.242 in / 133.1468 mm (6.165 in / 156.591 mm high w/ flanges attached)
Depth: 8.082 in / 205.2828 mm
Rear Angle View Drawing
Front View Drawing
Side View Drawing
